Every now and then you may find yourself having to run your dishwasher a second time or having to hand wash dishes that have already been run through the dishwasher. Here are some tips to help you avoid this and make your dishwasher run the best it can.
The easiest thing to check on your dishwasher is water temperature. To do this simply turn the water on at the faucet and see how long it takes for hot water to reach the sink. The longer it takes to reach the sink, the less efficient your dishwasher is during that same amount of time. Use your dishwasher when there’s already hot water at the sink and there’s no other hot water being diverted for showers or baths.
Dirty dishes may also be caused by a blocked or slow drain. Since the sink and dishwasher use the same drain you can run the garbage disposal before using the dishwasher to clear any debris.
Putting too much detergent in your dishwasher is another main cause of dishes coming out dirty. Too much detergent will leave a sticky film behind that can cause water stains and will require you to wash the dishes again. Too little detergent and your dishes won’t come clean. When it comes to detergents it’s best to consult your owner’s manual before use.
Something we often miss when loading our dishes are utensils that are too tall. The sprayer arm can hit the tall utensil and stop rotating. The holes in the sprayer arm can also become clogged with calcium buildup. Use a strong brush to remove the calcium buildup and wash tall utensils by hand or lay them across the top rack so they don’t interfere with the spray arm.
The last thing for a homeowner to check on their dishwasher is the condition of the dishwasher’s interior. Every 6 months you should run a cycle with no dishes and no detergent. Calcium, grease, soap and food particles can build up inside the dishwasher and dislodge during cycles to soil dishes. When running the cleaning cycle you should let the bottom fill with water and then add two cups of white vinegar, then continue the wash cycle. This will help loosen up and remove all the damaging particles.
For more information please consult your owner’s manual or give our service department a call to schedule a technician to visit your home.